2011 parts at meet in Virginie state FROM OREGON

User avatar
trooper T/diesel
Regular Member
Posts: 2747
Joined: Fri May 16, 2008 6:24 pm
Location: oregon

Re: 2011 parts at meet in Virginie state FROM OREGON

Post by trooper T/diesel »

X-jeeper wrote:I'd like the diesel emblems off the red pup


$25.00 for bolth sides. there PUP emblems not luv ones.
plus shipping if i can not make it back there.
luvcamas
Regular Member
Posts: 1833
Joined: Sun Jan 03, 2010 1:32 pm
Location: camas WASHINGTON

Re: 2011 parts at meet in Virginie state FROM OREGON

Post by luvcamas »

:mrgreen: :x mr green is not happy with you east coast guys. Please donate to the " help the tropper/t foundation.
1986 turbo/diesel 4x4 SB in progress of a full frame off restoration
1981 2wd diesel LB
1981 4wd diesel SB
1982 diesel 4x4 SB
:mrgreen:
User avatar
trooper T/diesel
Regular Member
Posts: 2747
Joined: Fri May 16, 2008 6:24 pm
Location: oregon

Re: 2011 parts at meet in Virginie state FROM OREGON

Post by trooper T/diesel »

luvcamas wrote::mrgreen: :x mr green is not happy with you east coast guys. Please donate to the " help the tropper/t foundation.

its the same all the time, Isuzu people are penny pincher's, its just the way it is.


im working on a deal with some one, if it works, i could take his saw mill back east to sale and mabe bring him back a re-saw for his newer/bigger band mill, 0.50/0.75C a mile to :D it would be a all out bargen for him, and a ton of cash for me :!: cause every other quote hes gotten has been 1.50 a mile or 3.00 one way :shock:

but at this point its all in the air :!:

so....................any one want to buy a small wood mizer mill :lol:
X-jeeper
Regular Member
Posts: 41
Joined: Tue Jan 25, 2011 6:44 pm
Location: Raleigh, nc

Re: 2011 parts at meet in Virginie state FROM OREGON

Post by X-jeeper »

Sounds good on those emblems no big rush on them let me know if you can't make the trip.
81 LUV diesel 2wd 5 speed...driving it til the wheels fall off!
Gerald K4NHN
Regular Member
Posts: 1233
Joined: Thu May 29, 2008 10:37 am
Location: Cayce, SC

Re: 2011 parts at meet in Virginie state FROM OREGON

Post by Gerald K4NHN »

David, did you decide if you could let the clamp and bracket go?

[color=#0000FF]yes it is the mount that bolts to the trans with the part that clamps to the pipe, just a foot or so down stream from the manafold.

its from a T\D C223 engine
[/color]
Gerald K4NHN
Cayce, SC

"One test is worth a thousand opinions"

1983 LS DIESEL LONG BED 2 W/D 126K miles

1986 LS Trooper Tubro Diesel 4 W/D 186K + miles SOLD
User avatar
trooper T/diesel
Regular Member
Posts: 2747
Joined: Fri May 16, 2008 6:24 pm
Location: oregon

Re: 2011 parts at meet in Virginie state FROM OREGON

Post by trooper T/diesel »

Gerald K4NHN wrote:David, did you decide if you could let the clamp and bracket go?

no its not something i need at all, i have two others in autos that are planed to be parted out.

$10.00 OBO :?:
Gerald K4NHN
Regular Member
Posts: 1233
Joined: Thu May 29, 2008 10:37 am
Location: Cayce, SC

Re: 2011 parts at meet in Virginie state FROM OREGON

Post by Gerald K4NHN »

OK
Gerald K4NHN
Cayce, SC

"One test is worth a thousand opinions"

1983 LS DIESEL LONG BED 2 W/D 126K miles

1986 LS Trooper Tubro Diesel 4 W/D 186K + miles SOLD
User avatar
swvaed
Regular Member
Posts: 345
Joined: Mon Jun 30, 2008 6:41 pm
Location: Roanoke, Va. 30 minutes north
Isuzu vehicle(s): 1990 Pickup long cab 5 speed

Re: 2011 parts at meet in Virginie state FROM OREGON

Post by swvaed »

Well, Trooper T, maybe I can advertise a little for you. If anyone is hesitant to run 15 inch rims, here is my ruff and tumble 92 2.3L 5sp running rims off a Trooper with 235 15 STUDDED snow tires (originally from my S10) and standard 14 rims up front. I'm up in the mountains in Va. and run fire and rescue with the big boy 4wd's. I'm a little more than 10% off on the speedo, so when I'm running 60, I'm turning rpms for less than 55. I'm sure if it was measured, there would be a difference in torque, but I don't seem to notice it. Handling doesn't seem to be affected. The original size tires from the Trooper would clear on the steer axle, I'm running the two 14 tires just because I have them.
Attachments
100_0589.JPG
99 S10/DD
01 Jimmy/Better DD
Gerald K4NHN
Regular Member
Posts: 1233
Joined: Thu May 29, 2008 10:37 am
Location: Cayce, SC

Re: 2011 parts at meet in Virginie state FROM OREGON

Post by Gerald K4NHN »

David, I need to send you money for the bracket and clamp.
Gerald K4NHN
Cayce, SC

"One test is worth a thousand opinions"

1983 LS DIESEL LONG BED 2 W/D 126K miles

1986 LS Trooper Tubro Diesel 4 W/D 186K + miles SOLD
Mini-Pup-Charles
Regular Member
Posts: 641
Joined: Wed Nov 07, 2007 7:29 pm
Location: acworth GA. bartow county

Re: 2011 parts at meet in Virginie state FROM OREGON

Post by Mini-Pup-Charles »

david. i need the front turn signal lights. off one of the pups. if you are willing to part with them. ive got the side markers. just no turn signals.
1981 isuzuPup 2.2 diesel- bagged and boddied short bed, 5 speed 34'' shifter, twin stacks. ("The Mistress")
User avatar
trooper T/diesel
Regular Member
Posts: 2747
Joined: Fri May 16, 2008 6:24 pm
Location: oregon

Re: 2011 parts at meet in Virginie state FROM OREGON

Post by trooper T/diesel »

Mini-Pup-Charles wrote:david. i need the front turn signal lights. off one of the pups. if you are willing to part with them. ive got the side markers. just no turn signals.


you mean the ones in the bumper that get beat up???


or housings left, right or bolth up buy the head lights?

not the head light mountings, just the turn signal plastic that the light balb goes in?
Mini-Pup-Charles
Regular Member
Posts: 641
Joined: Wed Nov 07, 2007 7:29 pm
Location: acworth GA. bartow county

Re: 2011 parts at meet in Virginie state FROM OREGON

Post by Mini-Pup-Charles »

trooper T/diesel wrote:
Mini-Pup-Charles wrote:david. i need the front turn signal lights. off one of the pups. if you are willing to part with them. ive got the side markers. just no turn signals.


you mean the ones in the bumper that get beat up???


or housings left, right or bolth up buy the head lights?

not the head light mountings, just the turn signal plastic that the light balb goes in?


i need everything for the front turn signals. housing, lenses, even the wires to plug in the lights. the ones i had were stolen with my tool box.
1981 isuzuPup 2.2 diesel- bagged and boddied short bed, 5 speed 34'' shifter, twin stacks. ("The Mistress")
Gerald K4NHN
Regular Member
Posts: 1233
Joined: Thu May 29, 2008 10:37 am
Location: Cayce, SC

Re: 2011 parts at meet in Virginie state FROM OREGON

Post by Gerald K4NHN »

David I put your $ in the mail today, let me know if it makes it there OK.
Gerald K4NHN
Cayce, SC

"One test is worth a thousand opinions"

1983 LS DIESEL LONG BED 2 W/D 126K miles

1986 LS Trooper Tubro Diesel 4 W/D 186K + miles SOLD
Gerald K4NHN
Regular Member
Posts: 1233
Joined: Thu May 29, 2008 10:37 am
Location: Cayce, SC

Re: 2011 parts at meet in Virginie state FROM OREGON

Post by Gerald K4NHN »

David, the part came in today, Thanks and let me know when the payment gets there.
Gerald K4NHN
Cayce, SC

"One test is worth a thousand opinions"

1983 LS DIESEL LONG BED 2 W/D 126K miles

1986 LS Trooper Tubro Diesel 4 W/D 186K + miles SOLD
Gerald K4NHN
Regular Member
Posts: 1233
Joined: Thu May 29, 2008 10:37 am
Location: Cayce, SC

Re: 2011 parts at meet in Virginie state FROM OREGON

Post by Gerald K4NHN »

david, did the money make it there OK
Gerald
Gerald K4NHN
Cayce, SC

"One test is worth a thousand opinions"

1983 LS DIESEL LONG BED 2 W/D 126K miles

1986 LS Trooper Tubro Diesel 4 W/D 186K + miles SOLD
Post Reply