Hey guys,
I have been slowly working on bringing my 1991 Pickup got the old carb off and replaced it with a Weber 32/36, got it to run and spent way to long building a overly complicated throttle bracket only to replace it with something much simpler the next weekend. The problem I'm currently running into is that originally the throttle cable had way too much slack at the carb side. I am trying to take up the slack at the peddle side of things but I'm having an issue with access.
Does anyone have any pointers on how they took the slack out of their cable, like can I pull the housing through the firewall more or something? Any advise is welcome. Pictures would help most as I'm a visual learner.
- Nate