IsuzuPup.com

Welcome!

That was a great meet with a huge turnout.

We had one of our Pup meets years ago down below graham in your neck of the woods.viewforum.php?f=33

What area are you in again,Mike? I'm in the Triad

Welcome!

Welcome

Could this or something like it get you going? https://www.amazon.com/OBQSNS-Diameter-Fittings-Fitting-Motorcycle/dp/B0DLJ7LDBJ/ref=mp_s_a_1_4?crid=315LT6YAUPM6Q&dib=eyJ2IjoiMSJ9.U3mOHRdpZ0bq01xBwoCJHPkHXIxCK8WU6jeGQc-ErlzMz-Veg_RkSwL9vmld3NUz0GA8Nk-Rdu7v7dsaLtj61G1_7PGMgsQ1PANsO60zoJU00nY8xIi8q...

Read through this. viewtopic.php?t=17581 meanwhile I'll look at other alternatives.

I don't know about the DIY question. There should be no need to drain the oil. Both ends of the line are well above the level of the oil in the pan. I almost repeated what Andy said above -- see comments from "puttputtinpup". Jack I wonder if Mintys (sp?) would still have new hoses, or if...

That vacuum actuator may be bad. Draw a vacuum on a hose connected to the actuator. See if it leaks down. If okay, a hose should run from that actuator to a small black vacuum switch located I think on the inner fender near the horn. Looks like a fat wasp with no wings...lol. it'll have a plug on it...

JoeIsuzu wrote: ↑Mon Jun 09, 2025 5:30 am

Halden wrote: ↑Sun Jun 08, 2025 9:34 pm Holy cow. For a second there I thought you'd finally made it big, Jack.

Nah, white is not my color.

Jack

Sour grapes?

When the valve is closed the cock forces a seal up against a seat located inside the valve body. This type of valves leak because the seal has shrunk over time and no longer presses tightly into the seat, the seat itself is damaged or both. First step is to clean the seat inside the valve body and ...

Looks good. I'd never seen that issue before either. Many of them are so stiff inside, they won't cancel after a turn. I had taken several apart to clean up the stiff dried out lube and re-lubricate the moving parts.

Note: whenever loosening or removing fittings with banjo bolts and sealing washers, replace the washers. Auto parts stores should have an assortment to choose from.

Looks good! If I still had my pup, I'd be considering