I have a few questions

Whether it's up high or draggin', this is the place to discuss anything related to body and suspension modifications for street or offroad use.
Regular Member
Posts: 10
Joined: Mon Jun 05, 2017 8:59 pm
Location: Oklahoma city
Isuzu vehicle(s): 1992 Isuzu pickup

I have a few questions

Postby Seansean » Tue Jun 06, 2017 9:48 pm

Does anyone know any other ways I could lower my truck more I'm sitting at 3 inches from the front by loosening the torsion bar and 3 inches from the rear with drop blocks I'm looking to have no wheel gap just not to sure what parts I need for it and where to find it here's some pictures in how it looks

User avatar
Regular Member
Posts: 7
Joined: Tue Jan 24, 2017 9:35 pm
Location: College Station, TX
Isuzu vehicle(s): 1984 Isuzu pup, short bed, gas

Re: I have a few questions

Postby flamedranger » Fri Jun 09, 2017 12:53 pm

go with airride

User avatar
Regular Member
Posts: 232
Joined: Mon Feb 25, 2008 9:21 pm
Location: Friendswood, Texas
Isuzu vehicle(s): 1983 P'up 1.9L

Re: I have a few questions

Postby Blue83 » Sat Jun 17, 2017 10:39 pm

bag it orrrrrrr.. re-index the torsion bars and pull a leaf out of the leaf-spring pack 8) works everytime. You'll probably be low enough that you'll need to pull out the bump stops! nice
1983 P'up Longbed 1.9L Bagged and Bodied on 18" Centerline Razors.

Regular Member
Posts: 55
Joined: Sat Sep 19, 2015 3:54 pm
Location: Arizona
Isuzu vehicle(s): 92 Isuzu Pickup 2.3L carb 5spd 2wd

Re: I have a few questions

Postby mar_phi6 » Wed Dec 20, 2017 9:31 pm

You have 3 inch block in the rear. Looks good from the pics.

Regular Member
Posts: 53
Joined: Wed May 10, 2017 10:22 pm
Location: Jacksonville Florida
Isuzu vehicle(s): 1992 Isuzu Pickup 2.3L

Re: I have a few questions

Postby korbin22 » Mon Jul 30, 2018 9:10 pm

Get drop spindles in the front, a lot of people have problems with them but I’ve heard mixed reviews. But in the back I have 3 inch and took out a spring. Still a tiny wheel gap and rides rough. If you want to go low and stay with the static look get drop spindles in the front and get a u joint in the back. You have to cut into frame and truck bed but you’ll be able to lower it and have good clearance