Hey All…

This is for "Introductions". Tell us about YOUR P'up, and a little about yourself (if you like). This is also the place for updates, tall tales, etc. about YOUR P'up. No technical questions here, please.
Forum rules
This forum is to be Family Friendly.

This is for "Introductions". Tell us about YOUR P'up, and a little about yourself (if you like). This is also the place for updates, tall tales, etc. about YOUR P'up. Include photos of your truck, if available (See this for an example).

This is not the appropriate place for technical questions. Please post those in the appropriate Troubleshooting or Upgrades section.
Post Reply
Jonno634
Regular Member
Posts: 3
Joined: Tue Jun 22, 2021 5:14 pm
Location: Washington
Isuzu vehicle(s): 80’s p’up 4x4 gasser

Hey All…

Post by Jonno634 »

I am a farmer in Washington state. About 2 years ago, I acquired a 1984(?) P’pu. It’s a gasser, 4x4 with a manual. Overall, it’s in decent shape, till it wasn’t.
User avatar
JoeIsuzu
Site Admin
Posts: 20943
Joined: Thu Aug 19, 2004 9:11 am
Location: Germantown (next to Elvistown), TN
Isuzu vehicle(s): Original owner, '83 LS Diesel, 5-spd, 2wd, Long Bed, restoration in progress!

Re: Hey All…

Post by JoeIsuzu »

Welcome to the site. It's easy enough to confirm the year from the 10th digit of the VIN:
A=1980 (the US did not have this in 1980)
B=1981
C=1982
D=1983
E=1984
F=1985
G=1986
H=1987

That's important for parts like brakes, which had some changes through the years.

Jack
Jonno634
Regular Member
Posts: 3
Joined: Tue Jun 22, 2021 5:14 pm
Location: Washington
Isuzu vehicle(s): 80’s p’up 4x4 gasser

Re: Hey All…

Post by Jonno634 »

Thanks… 1984 is correct, based on that.
Post Reply